Microgravity propellant tank geyser analysis and prediction
Abstract
An established correlation for geyser height prediction of an axial jet inflow into a microgravity propellant tank was analyzed and an effort to develop an improved correlation was made. The original correlation, developed using data from ethanol flow in small-scale drop tower tests, uses the jet-Weber number and the jet-Bond number to predict geyser height. A new correlation was developed from the same set of experimental data using the jet-Weber number and both the jet-Bond number and tank-Bond number to describe the geyser fomiation. The resulting correlation produced nearly a 40% reduction in geyser height predictive error compared to the original correlation with experimental data. Two additional tanks were computationally modeled in addition to the small-scale tank used in the drop tower testing. One of these tanks was a 50% enlarged small-scale tank and the other a full-scale 2 m radius tank. Simulations were also run for liquid oxygen and liquid hydrogen. Results indicated that the new correlation outperformed the original correlation in geyser height prediction under most circumstances. The new correlation has also shown a superior ability to recognize the difference between flow patterns II (geyser formation only) and III (pooling at opposite end of tank from the bulk fluid region). © 2001 by R. J. Thornton and J. I. Hochstein.
Publication Title
39th Aerospace Sciences Meeting and Exhibit
Recommended Citation
Thornton, R., & Hochstein, J. (2001). Microgravity propellant tank geyser analysis and prediction. 39th Aerospace Sciences Meeting and Exhibit https://doi.org/10.2514/6.2001-1132
