Submissions from 2016
Adhesive bond failure monitoring with triboluminescent optical fiber sensor, Md Abu S. Shohag, Emily C. Hammel, David O. Olawale, and Okenwa O. Okoli
Microstructure evolution and simulation study of a duplex Mg-Li alloy during Double Change Channel Angular Pressing, Guobing Wei, Yahya Mahmoodkhani, Xiaodong Peng, Amir Hadadzadeh, Tiancai Xu, Junwei Liu, Weidong Xie, and Mary A. Wells
Deformation behavior and constitutive model for dual-phase Mg-Li alloy at elevated temperatures, Guo Bing Wei, Xiao Dong Peng, Fa Ping Hu, Amir Hadadzadeh, Yan Yang, Wei Dong Xie, and Mary A. Wells
Buckypaper-cored novel photovoltaic sensors for in-situ structural health monitoring of composite materials using hybrid quantum dots, Jin Yan, Deborah E. Daramola, Julian M. Antolinez, Nnamdi Okoli, Tarik J. Dickens, and Okenwa I. Okoli
3d sensing using solid-state wire-shaped photovoltaic sensor in tl-based structural health monitoring, Jin Yan, M. Jasim Uddin, David O. Olawale, Tarik J. Dickens, and Okenwa O.I. Okoli
Submissions from 2015
Micromechanics predictions for two-phased nanocomposites and three-phased multiscale composites: A review, Chelsea E.E. Armbrister, Okenwa I. Okoli, and Sachin Shanbhag
A modified two-mode phase-field crystal model applied to face-centered cubic and body-centered cubic orderings, Ebrahim Asadi and Mohsen Asle Zaeem
A Review of Quantitative Phase-Field Crystal Modeling of Solid–Liquid Structures, Ebrahim Asadi and Mohsen Asle Zaeem
Quantifying a two-mode phase-field crystal model for BCC metals at melting point, Ebrahim Asadi and Mohsen Asle Zaeem
Quantitative modeling of the equilibration of two-phase solid-liquid Fe by atomistic simulations on diffusive time scales, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Two-phase solid-liquid coexistence of Ni, Cu, and Al by molecular dynamics simulations using the modified embedded-atom method, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Stretchlon film-enhanced ridft process for composite manufacture, Divyesh H. Bhakta, David O. Olawale, Tarik Dickens, and Okenwa I. Okoli
Healthcare engineering defined: A white paper, Ming Chien Chyu, Tony Austin, Fethi Calisir, Samuel Chanjaplammootil, Mark J. Davis, Jesus Favela, Heng Gan, and Amit Gefen
Characterization of triboluminescent enhanced discontinuous glass-fiber composite beams for micro-damage detection and fracture assessment, Tarik Dickens, Chelsea Armbrister, David Olawale, and Okenwa Okoli
Tensile, creep and fatigue behaviours of short fibre reinforced polymer composites at elevated temperatures: A literature survey, M. Eftekhari and A. Fatemi
Fatigue Behavior and Predictive Modeling of Short Fiber Thermoplastic Composites, Ali Fatemi, Seyyedvahid Mortazavian, and Abolhasan Khosrovaneh
Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing, Nicholas R. Gates and Ali Fatemi
Fatigue life of 2024-T3 aluminum under variable amplitude multiaxial loadings: Experimental results and predictions, Nicholas R. Gates and Ali Fatemi
The bipolar diffusion charging of nanoparticles: A review and development of approaches for non-spherical particles, Ranganathan Gopalakrishnan, Peter H. McMurry, and Christopher J. Hogan
The electrical mobilities and scalar friction factors of modest-to-high aspect ratio particles in the transition regime, Ranganathan Gopalakrishnan, Peter H. McMurry, and Christopher J. Hogan
Inverse and centreline segregation formation in twin roll cast AZ31 magnesium alloy, A. Hadadzadeh and M. A. Wells
Control oriented discretized cathode control volume method for improved PEM fuel cell modeling, Alexander J. Headley and Dongmei Chen
Critical control volume sizing for improved transient thermal modeling of PEM fuel cells, Alexander J. Headley and Dongmei Chen
Not all approved antibiotic-loaded PMMA bone cement brands are the same: ranking using the utility materials selection concept, Gladius Lewis
Fabrication of silicon nanowire on freestanding multiwalled carbon nanotubes by chemical vapor deposition, Teng Liu, Richard Liang, Okenwa Okoli, and Mei Zhang
Fatigue Behavior of Cast Iron Including Mean Stress Effects, Nicholas Meyer, Ali Fatemi, Steven McCutcheon, Brian Havard, and William Fairchilds
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites, Seyyedvahid Mortazavian and Ali Fatemi
Fatigue behavior and modeling of short fiber reinforced polymer composites: A literature review, Seyyedvahid Mortazavian and Ali Fatemi
Fatigue behavior and modeling of short fiber reinforced polymer composites including anisotropy and temperature effects, Seyyedvahid Mortazavian and Ali Fatemi
Effect of Water Absorption on Tensile and Fatigue Behaviors of Two Short Glass Fiber Reinforced Thermoplastics, Seyyedvahid Mortazavian, Ali Fatemi, and Abolhassan Khosrovaneh
Effect of cycling frequency and self-heating on fatigue behavior of reinforced and unreinforced thermoplastic polymers, Seyyedvahid Mortazavian, Ali Fatemi, Stephen R. Mellott, and Abolhassan Khosrovaneh
Tensile and fatigue behaviors of polymers for automotive applications, S. Mortazavian and A. Fatemi
Challenges of fluid phase behavior modeling in Iranian retrograde gas condensate reservoirs, H. R. Nasriani, E. Asadi, M. Nasiri, L. Khajenoori, and M. Masihi
Triboluminescent composite with in-situ impact sensing capability, David Olawale, Divyesh Bhakta, Emily Hammel, Jin Yan, Donovan Carey, Tarik Dickens, and Okenwa I. Okoli
On the use of biaxial properties in modeling annulus as a Holzapfel-Gasser-Ogden material, Narjes Momeni Shahraki, Ali Fatemi, Vijay K. Goel, and Anand Agarwal
Microstructure evolution and mechanical properties of Mg-9Li-3Al-2Sr alloy in change channel angular pressing, G. Wei, X. Peng, J. Liu, A. Hadadzadeh, Y. Yang, and W. Xie
Constitutive modeling of Mg-9Li-3Al-2Sr-2Y at elevated temperatures, Guobing Wei, Xiaodong Peng, Amir Hadadzadeh, Yahya Mahmoodkhani, Weidong Xie, Yan Yang, and Mary A. Wells
Influence of I-phase and W-phase on microstructure and mechanical properties of Mg-8Li-3Zn alloy, Guo Bing Wei, Xiao Dong Peng, Bao Zhang, Amir Hadadzadeh, Tian Cai Xu, and Wei Dong Xie
Submissions from 2014
Phase-field crystal model for Fe connected to MEAM molecular dynamics simulations, Ebrahim Asadi, Mohsen Asle Zaeem, and Michael I. Baskes
Effect of vacancy defects on generalized stacking fault energy of fcc metals, Ebrahim Asadi, Mohsen Asle Zaeem, Amitava Moitra, and Mark A. Tschopp
Flame and flow topologies in an annular swirling flow, I. Chterev, C. W. Foley, D. Foti, S. Kostka, A. W. Caswell, N. Jiang, A. Lynch, and D. R. Noble
Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings, Ali Fatemi, Nicholas Gates, Darrell F. Socie, and Nam Phan
Tensile and fatigue behaviors of two thermoplastics including strain rate, temperature, and mean stress effects, Ali Fatemi, Steve Mellot, Abolhassan Khosrovaneh, and Charles Buehler
Special Issue on 'Multiaxial Fracture 2013': Selected papers from the 10th International Conference on Multiaxial Fatigue and Fracture (ICMFF10), held in Kyoto, Japan, on 3-6 June 2013, Ali Fatemi, Les P. Pook, Andrea Spagnoli, and Shan Tung Tu
Expanding and improving the integration of multidisciplinary projects in a capstone senior design course: Experience gained and future plans, Michael P. Frank, Kamal E. Amin, Okenwa I. Okoli, Robert A. Van Engelen, and Chiang Shih
Notched fatigue behavior and stress analysis under multiaxial states of stress, Nicholas Gates and Ali Fatemi
Notched fatigue behavior under multiaxial stress states, Nicholas R. Gates, Ali Fatemi, Darrell F. Socie, and Nam Phan
Load sequence effects on fatigue crack growth in notched tubular specimens subjected to axial and torsion loadings, Maksym Gladskyi and Ali Fatemi
The effect of gas tungsten arc welding and pulsed-gas tungsten arc welding processes' parameters on the heat affected zone-softening behavior of strain-hardened Al-6.7Mg alloy, Amir Hadadzadeh, Majid Mahmoudi Ghaznavi, and Amir Hossein Kokabi
Development of a mathematical model to study the feasibility of creating a clad AZ31 magnesium sheet via twin roll casting, Amir Hadadzadeh, Mary A. Wells, and Vignesh Jayakrishnan
Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy, Amir Hadadzadeh, Mary A. Wells, and In Ho Jung
Processing and properties of advanced porous ceramics: An application based review, E. C. Hammel, O. L.R. Ighodaro, and O. I. Okoli
Corrigendum to "A mouse model of ocular blast injury that induces closed globe anterior and posterior pole damage" [Exp. Eye Res. 99 (2012) 63-70], Jessica Hines-Beard, Jeff Marchetta, Sara Gordon, Edward Chaum, Eldon E. Geisert, and Tonia S. Rex
Effect of 2-D regular channels and their configurations on properties of ceramic preforms, Osayande L. Ighodaro and Okenwa I. Okoli
Solidification characteristics of wrought magnesium alloys containing rare earth metals, A. Javaid, F. Czerwinski, R. Zavadil, M. Aniolek, and A. Hadadzadeh
Fatigue behavior and modeling of thermoplastics including temperature and mean stress effects, Stephen R. Mellott and Ali Fatemi
Notch effects on fatigue behavior of thermoplastics, Seyyedvahid Mortazavian and Ali Fatemi
Durability of ZnS: Mn triboluminescent sensor for impact damage monitoring in civil infrastructure, David O. Olawale, Tarik Dickens, and Okenwa I. Okoli
Real time failure detection in unreinforced cementitious composites with triboluminescent sensor, David O. Olawale, Kaitlyn Kliewer, Annuli Okoye, Tarik J. Dickens, Mohammed J. Uddin, and Okenwa I. Okoli
Getting light through cementitious composites with in situ triboluminescent damage sensor, David O. Olawale, Kaitlyn Kliewer, Annuli Okoye, Tarik Dickens, Mohammed J. Uddin, and Okenwa I. Okoli
Effect of aerogel particle concentration on mechanical behavior of impregnated RTV 655 compound material for aerospace applications, Firouzeh Sabri, Jeffrey G. Marchetta, K. M.Rifat Faysal, Andrew Brock, and Esra Roan
Small fatigue crack growth under multiaxial stresses, Nima Shamsaei and Ali Fatemi
A high efficiency 3D photovoltaic microwire with carbon nanotubes (CNT)-quantum dot (QD) hybrid interface, Mohammed J. Uddin, Deborah E. Daramola, Ever Velasquez, Tarik J. Dickens, Jin Yan, Emily Hammel, Federico Cesano, and Okenwa I. Okoli
Graphene nanoribbons and 2D carbon nanostructures from multiwalled carbon nanotubes, Hai H. Van, Kaelyn Badura, Okenwa Okoli, and Mei Zhang
Twin roll casting (TRC) of magnesium alloys - Opportunities and challenges, Mary A. Wells and Amir Hadadzadeh
Direct and interactive influence of explanatory variables on properties of a calcium phosphate cement for vertebral body augmentation, Daniel M. Werdofa and Gladius Lewis
3D novel photovoltaic sensors for in-situ structural health monitoring (SHM) of composite materials using hybrid quantum dots (QDS), Jin Yan, M. Jasim Uddin, Tarik J. Dickens, Deborah E. Daramola, and Okenwa I. Okoli
3D Wire-Shaped Dye-Sensitized Solar Cells in Solid State Using Carbon Nanotube Yarns with Hybrid Photovoltaic Structure, Jin Yan, M. Jasim Uddin, Tarik J. Dickens, Deborah E. Daramola, and Okenwa I. Okoli
A constrained extended kalman filter for state-of-charge estimation of a vanadium redox flow battery with crossover effects, Victor Yu, Alex Headley, and Dongmei Chen
Submissions from 2013
Free vibration of thick laminated cylindrical shells with different boundary conditions using general differential quadrature, Ebrahim Asadi and Mohamad S. Qatu
Dynamic fracture analysis of multiple defects in an imperfect FGM coating-substrate layers, R. Bagheri, M. Ayatollahi, and E. Asadi
Notched fatigue behavior including load sequence effects under axial and torsional loadings, Maksym Gladskyi and Ali Fatemi
Brownian Dynamics Determination of the Bipolar Steady State Charge Distribution on Spheres and Non-spheres in the Transition Regime, Ranganathan Gopalakrishnan, Mark J. Meredith, Carlos Larriba-Andaluz, and Christopher J. Hogan
The unipolar diffusion charging of arbitrary shaped aerosol particles, Ranganathan Gopalakrishnan, Thaseem Thajudeen, Hui Ouyang, and Christopher J. Hogan
Mathematical modeling of the effect of roll diameter on the thermo-mechanical behavior of twin roll cast AZ31 magnesium alloy strips, Amir Hadadzadeh and Mary Wells
Mathematical modeling of thermo-mechanical behavior of strip during twin roll casting of an AZ31 magnesium alloy, Amir Hadadzadeh and Mary A. Wells
Effect of roll diameter on the thermal-mechanical behaviour of AZ31 strip during twin roll casting, A. Hadadzadeh and M. A. Wells
Thermal fluid mathematical modelling of twin roll casting (TRC) process for AZ31 magnesium alloy, A. Hadadzadeh and M. A. Wells
Development and validation of a dynamic thermal model for a polymer electrolyte membrane fuel cell, Alexander Headley, Budi Hadisujoto, Dongmei Chen, and Tess J. Moon
Intrinsic structural damage monitoring of advanced composite laminates with embeddable 3D sensors network, M. Jasim Uddin, Jin Yan, Tarik J. Dickens, David O. Olawale, and Okenwa I. Okoli
Manufacturing process improvement and mechanical modelling of multiwalled carbon nanotube/epoxy composites, M. Kim, O. I. Okoli, D. Jack, and Y. B. Park
Predicting mechanical properties of multiscale composites, M. Kim, O. I. Okoli, D. Jack, Y. B. Park, and Z. Liang
Properties of open-cell porous metals and alloys for orthopaedic applications, Gladius Lewis
Surprises, new knowledge in microgravity, Brian Motil, Michael Hicks, and Jeffrey Marchetta
Multifunctional cementitious composites with structural and damage monitoring capabilities for smart bridges, David O. Olawale, Kaitlyn Kliewer, Tarik Dickens, Mohammed J. Uddin, and Okenwa I. Okoli
Triboluminescent optical nerves for smart concrete structures, D. O. Olawale, K. Kliewer, T. Dickens, M. J. Uddin, and O. I. Okoli
Thermal conductivity studies of a polyurea cross-linked silica aerogel-RTV 655 compound for cryogenic propellant tank applications in space, F. Sabri, J. Marchetta, and K. M. Smith
A daptomycin-Xylitol-loaded polymethylmethacrylate bone cement: How much Xylitol should be used?, Ali Salehi, Ashley Cox Parker, Gladius Lewis, Harry S. Courtney, and Warren O. Haggard
Design of a first metatarsophalangeal joint simulator, Kelly Schlachter and Gladius Lewis
Self-aligned carbon nanotubes yarns (CNY) with efficient optoelectronic interface for microyarn shaped 3D photovoltaic cells, M. J. Uddin, B. Davies, T. J. Dickens, and O. I. Okoli
Solid state dye-sensitized photovoltaic micro-wires (DSPMs) with carbon nanotubes yarns as counter electrode: Synthesis and characterization, M. J. Uddin, T. Dickens, J. Yan, R. Chirayath, D. O. Olawale, and O. I. Okoli
Tailoring the efficiency of 3D wire-shaped photovoltaic cells (WPVCs) by functionalization of solid-liquid interfacial properties, Jin Yan, M. Jasim Uddin, Tarik J. Dickens, Deborah E. Daramola, David Olawale, and Okenwa I. Okoli
Carbon nanotubes (CNTs) enrich the solar cells, J. Yan, M. J. Uddin, T. J. Dickens, and O. I. Okoli
3D photovoltaic sensors for in-situ structural health monitoring of advanced composites, J. Yan, M. J. Uddin, T. Dickens, D. O. Olawale, and O. I. Okoli
Cumulative fatigue damage and life prediction of elastomeric components, T. Zarrin-Ghalami and A. Fatemi
Fatigue life predictions of rubber components: Applications to an automobile cradle mount, Touhid Zarrin-Ghalami and Ali Fatemi
Multiaxial fatigue and life prediction of elastomeric components, Touhid Zarrin-Ghalami and Ali Fatemi
Fatigue Life Prediction of an Automobile Cradle Mount, Touhid Zarrin-Ghalami, Ali Fatemi, and Yung Li Lee
Submissions from 2012
Optimising lamp positions in UV curing of composite components manufactured using RIDFT process, O. S. Adewuyi, O. I. Okoli, and D. A. Jack
Anti-plane analysis of orthotropic strips with defects and imperfect FGM coating, Ebrahima Asadi, Shahriar J. Fariborz, and Ali R. Fotuhi
