Follow

Submissions from 2008

Link

Evaluation of a highly-radiopaque iodine-containing acrylic bone cement for use in augmentation of vertebral compression fractures, Erik J.H. Boelen, Gladius Lewis, Jie Xu, Tristan Slots, Leo H. Koole, and Catharina S.J. Van Hooy-Corstjens

Harnessing triboluminescence for structural health monitoring of composite structures, Tarik Dickens, Okenwa I. Okoli, and Zhiyong Liang

Link

Constitutive behavior and temperature effects in NR and SBR under variable amplitude and multiaxial loading conditions, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Link

Fatigue crack orientation in NR and SBR under variable amplitude and multiaxial loading conditions, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Link

Fatigue life analysis and predictions for NR and SBR under variable amplitude and multiaxial loading conditions, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Recent advances in fatigue life prediction methods for rubber components, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Link

Microgravity geyser and flowfield prediction, J. I. Hochstein, J. G. Marchetta, and R. J. Thornton

Effects of process and materials on pressureless sintering of alumina, Osayande L. Ighodaro and Okenwa I. Okoli

Link

Fracture toughness enhancement for alumina systems: A review, Osayande L. Ighodaro and Okenwa I. Okoli

Process optimization and mechanical characterization of multi-walled carbon nanotube/epoxy composites, Myungsoo Kim, Okenwa I. Okoli, and Young Bin Park

Link

Collaboration of technical editing students with mechanical engineering seniors in a capstone design course, Clinton Lanier, William S. Janna, and John I. Hochstein

Link

Cyclic deformation and fatigue behaviors of stainless steel 304L including mean stress and pre-straining effects, Jean Christophe Le Roux, Said Taheri, Jean Philippe Sermage, Julie Colin, and Ali Fatemi

Link

Alternative acrylic bone cement formulations for cemented arthroplasties: Present status, key issues, and future prospects, Gladius Lewis

Link

Materials, fluid dynamics, and solid mechanics aspects of coronary artery stents: A state-of-the-art review, Gladius Lewis

Link

The use of nanoindentation for characterizing the properties of mineralized hard tissues: State-of-the art review, Gladius Lewis and Jeffry S. Nyman

Link

Evaluation of a synthetic vertebral body augmentation model for rapid and reliable cyclic compression life testing of materials for balloon kyphoplasty, Gladius Lewis, Jeffrey D. Schwardt, Thomas A. Slater, and Si Janna

Link

Thermal stability of acrylic bone cement powder under shelf storage conditions: An isothermal microcalorimetric study, Gladius Lewis and Yang Son

Biomechanical effects of autonomous augmentation on the adjacent unaugmented vertebral bodies: Influence of the number of functional spinal units in a finite element model, Gladius Lewis and J. Xu

Simulating Magnetic Positive Positioning of Liquids in a Transient Acceleration Field, Jeffrey G. Marchetta and Kevin M. Roos

Link

Magnetic retention of LO2 in an accelerating environment, Jeffrey G. Marchetta, Benjamin D. Simmons, and John I. Hochstein

Link

Using extended surfaces to reduce the thermal signatures of military assets, J. G. Marchetta, E. H. Perry, M. D. Schultz, B. A. Butler, and M. R. Grizzard

Link

Strain rate and temperature effects on tensile properties and their representation in deformation modeling of vinyl ester polymer, A. Plaseied and A. Fatemi

Link

Influence of carbon nanofiber content and surface treatment on mechanical properties of vinyl ester, A. Plaseied, A. Fatemi, and M. R. Coleman

Link

Deformation response and constitutive modeling of vinyl ester polymer including strain rate and temperature effects, Atousa Plaseied and Ali Fatemi

Submissions from 2007

Link

Fatigue crack growth of filled rubber under constant and variable amplitude loading conditions, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Link

The effect of a dwell period on fatigue crack growth rates in filled SBR and NR, Ryan J. Harbour, Ali Fatemi, and Will V. Mars

Link

Percutaneous vertebroplasty and kyphoplasty for the stand-alone augmentation of osteoporosis-induced vertebral compression fractures: Present status and future directions, Gladius Lewis

Link

Preheating Acrylic Bone Cement Powder Is Not Recommended for All Brands, Gladius Lewis and Si Janna

Link

Influence of changes in the composition of an acrylic bone cement on its polymerization kinetics, Gladius Lewis and Sanjay R. Mishra

One equivalent electrical circuit is applicable to model the interface between the passive surface layer on an orthopaedic alloy and a biosimulating aqueous solution, Gladius Lewis, Raghuveer Vejerla, and Sanjay Mishra

Link

Rapid and reliable biomechanical screening of injectable bone cements for autonomous augmentation of osteoporotic vertebral bodies: Appropriate values of elastic constants for finite element models, Gladius Lewis and Jie Xu

Link

Influence of the activator in an acrylic bone cement on an array of cement properties, Gladius Lewis, Jie Xu, Sanjukta Deb, Blanca Vázquez Lasa, and Julio San Román

Link

Evaluation of an accelerated aging medium for acrylic bone cement based on analysis of nanoindentation measurements on laboratory-prepared and retrieved specimens, Gladius Lewis, Jie Xu, Nicholas Dunne, Catherine Daly, and John Orr

Link

Influence of strontia on various properties of Surgical Simplex® P acrylic bone cement and experimental variants, Gladius Lewis, Jie Xu, Seamus Madigan, and Mark R. Towler

Link

Influence of two changes in the composition of an acrylic bone cement on its handling, thermal, physical, and mechanical properties, G. Lewis, J. Xu, S. Madigan, and M. R. Towler

Three dimensional modeling of jet-induced geysers in low gravity, Jeffrey G. Marchetta and Robert H. Benedetti

A three-dimensional computational simulation of magnetic positive positioning, Jeffrey G. Marchetta and Kevin M. Roos

Online learning objects: Do they enhance mastery of mechanical engineering concepts?, Jeffrey Marchetta and Edward Perry

Link

The correlation of fatigue crack growth rates in rubber subjected to multiaxial loading using continuum mechanical parameters, W. V. Mars and A. Fatemi

Link

Dynamic load and stress analysis of a crankshaft, Farzin H. Montazersadgh and Ali Fatemi

Influence of three variables on the stresses in a three-dimensional model of a proximal tibia-total knee implant construct, Partha Sarathi Kopparti and Gladius Lewis

Link

Fatigue performance of forged steel and ductile cast iron crankshafts, Jonathan Williams and Ali Fatemi

Submissions from 2006

Link

In-mold coating of composites manufactured by the resin infusion between double flexible tooling process by means of co-infusion, Posen Chiu and Okenwa I. Okoli

MP3 for retention of LO2 in an accelerating environment, John I. Hochstein, Benjamin D. Simmons, Steven H. Collicott, Steven T. Griffin, and Thomas C. Hagen

Collaboration of freshman with seniors in a capstone design course, William Janna and John Hochstein

Evaluation of a performance index of the padding material in an external hip protector, Gladius Lewis

Link

Injectable bone cements for use in vertebroplasty and kyphoplasty: State-of-the-art review, Gladius Lewis

Link

Influence of a pre-blended antibiotic (Gentamicin Sulfate Powder) on various mechanical, thermal, and physical properties of three acrylic bone cements, Gladius Lewis and Anuradha Bhattaram

Finite element analysis of a three-dimensional model of a proximal femur-cemented femoral THJR component construct: Influence of assigned interface conditions on strain energy density, Gladius Lewis and Rajesh Duggineni

Link

Alendronate in bone cement: Fatigue life degraded by liquid, not by powder, Gladius Lewis and Si Janna

Link

Estimation of the optimum loading of an antibiotic powder in an acrylic bone cement: Gentamicin sulfate in SmartSet HV, Gladius Lewis and Si Janna

Link

Critical comparison of two methods for the determination of nanomechanical properties of a material: Application to synthetic and natural biomaterials, Gladius Lewis, Jie Xu, Nicholas Dunne, Catherine Daly, and John Orr

Link

An experimental investigation of deformation and fatigue behavior of coach peel riveted joints, B. Li and A. Fatemi

Link

Influence of two changes in the composition of an acrylic bone cement on some of its properties: The case of Surgical Simplex® P, S. Madigan, M. R. Towler, and G. Lewis

Link

Optimisation of the composition of an acrylic bone cement: Application to relative amounts of the initiator and the activator/co-initiator in Surgical Simplex®P, S. Madigan, M. R. Towler, and G. Lewis

Link

Simulation of LOX reorientation using magnetic positive positioning, Jeffrey G. Marchetta

Simulation and prediction of jet induced geyser formation in microgravity propellant tanks, Jeffrey G. Marchetta, Christopher E. Kain, Benjamin Simmons, and Robert H. Benedetti

Link

Analysis of fatigue life under complex loading: Revisiting Cadwell, Merrill, Sloman, and Yost, W. V. Mars and A. Fatemi

Link

Multiaxial stress effects on fatigue behavior of filled natural rubber, W. V. Mars and A. Fatemi

Link

Nucleation and growth of small fatigue cracks in filled natural rubber under multiaxial loading, W. V. Mars and A. Fatemi

Link

Preliminary assessment of the ultra violet curing of composites manufactured by the resin infusion between double flexible tooling process, A. O. Nwabuzor and O. I. Okoli

The effectiveness of online learning objects in helping students master required course competencies in mechanical engineering, Edward Perry and Jeffrey Marchetta

Link

Mechanical properties and deformation behavior of a carbon nanofiber polymer composite material, Atousa Plaseied and Ali Fatemi

The utilization of formable paint films in the implementation of in-mold decoration of composites manufactured by the resin infusion between double flexible tooling (RIDFT) process, C. A. Puentes and O. I. Okoli

Computational modeling of cryogenic propellant resupply, Daniel R. Sauter, John I. Hochstein, and Larry W. Fite

Link

Dynamic analysis of loads and stress in connecting rods, P. S. Shenoy and A. Fatemi

The effects of processing parameters on the mechanical properties of components manufactured using the resin infusion between double flexible tooling process, L. Teemer, O. I. Okoli, and Z. Liang

Link

Experimental durability assessment and life prediction of vehicle suspension components: A case study of steering knuckles, M. Zoroufi and A. Fatemi

Submissions from 2005

Link

Application of bi-linear log-log S-N model to strain-controlled fatigue data of aluminum alloys and its effect on life predictions, A. Fatemi, A. Plaseied, A. K. Khosrovaneh, and D. Tanner

A new, reliable, and simple-to-use method for the analysis of a population of values of a random variable using the Weibull probability distribution: Application to acrylic bone cement fatigue results, Sied Janna, David P. Dwiggins, and Gladius Lewis

Influence of the composition of applied load and the modeling of the interfaces on the stresses in a model of a proximal tibia-total knee implant construct, Partha S. Kopparti and Gladius Lewis

Link

Prediction of the transient thermodynamic response of a closed-cycle regenerative gas turbine, T. Korakianitis, J. I. Hochstein, and D. Zou

Link

Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement, Gladius Lewis, Si Janna, and Anuradha Bhattaram

Link

Influence of the radiopacifier in an acrylic bone cement on its mechanical, thermal, and physical properties: Barium sulfate-containing cement versus iodine-containing cement, Gladius Lewis, Catharina S.J. Van Hooy-Corstjens, Anuradha Bhattaram, and Leo H. Koole

Preflight prediction and optimization of a reduced gravity experiment to investigate magnetic positive positioning of lox, Jeffrey G. Marchetta and Amanda P. Winter

Link

Multiaxial fatigue of rubber: Part I: Equivalence criteria and theoretical aspects, W. V. Mars and A. Fatemi

Link

Multiaxial fatigue of rubber: Part II: Experimental observations and life predictions, W. V. Mars and A. Fatemi

Defect-induced microcrack formation in cemented femoral stem model, Gang Qi, Jihui Li, and Gladius Lewis

Link

Defect-induced fatigue microcrack formation in cement mantle, Gang Qi, Jihui Li, W. Paul Mouchon, and Gladius Lewis

Link

Connecting rod optimization for weight and cost reduction, Pravardhan S. Shenoy and Ali Fatemi

Link

Magnetic retention of LOX in an off-axis accelerating environment, B. D. Simmons, J. I. Hochstein, J. G. Marchetta, and S. H. Collicott

Reduced gravity cryogenic propellant tank re-supply simulation and geyser prediction, Benjamin D. Simmons, Jeffrey G. Marchetta, and John I. Hochstein

A modal analysis study of interface failure of THA femoral component, Teong Tan, Ramu Pydimarri, and Gang Qi

Link

In-mold coating of composites manufactured by resin infusion between double flexible tooling process, N. Toro, O. I. Okoli, and H. P. Wang

Submissions from 2004

Link

A comparative study of fatigue behavior and life predictions of forged steel and PM connecting rods, Adila Afzal and Ali Fatemi

Link

Evaluation of a synthetic bone defect test model to aid in the selection of materials for use in vertebral body compression fracture repair, Michael Carroll, Gladius Lewis, J. Xu, Jon Moseley, Jantzen Cole, and Warren Haggard

Approaches to validation of models for low gravity fluid behavior, David J. Chato, Jeffery Marchetta, John I. Hochstein, and Mohammad Kassemi

Isothermal microcalorimetry (IMC): A new in-vitro technique for determining biomaterials stability and cellular biocompatibility, A. U. Daniels, D. Wirz, S. J. Charlebois, and G. Lewis

Link

Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels, A. Fatemi, Z. Zeng, and A. Plaseied

Electrochemical impedance spectroscopy studies of coated steel specimens in soils, Greg Hammon and Gladius Lewis

The balanced scorecard in a capstone design course, John I. Hochstein, Jeffrey G. Marchetta, and William S. Janna

A useful intersection: The balanced scorecard and EC2000, John I. Hochstein, Teong E. Tan, William S. Janna, Jeffrey G. Marchetta, Tommy Jamison, Bruce Shrader, and Michael Bilderbeck

An assessment process for a capstone course: Design of fluid thermal systems, William S. Janna and John I. Hochstein

Evaluation of a synthetic bone defect test model for screening injectable bone cements, G. Lewis, M. Carroll, and J. Xu

Link

Biomechanics of and research challenges in uncemented total ankle replacement, Gladius Lewis

Geometric element analysis of fretting in a model of a modular femoral component of a hip implant, Gladius Lewis

Link

Effect of fabrication pressure on the fatigue performance of Cemex XL acrylic bone cement, Gladius Lewis and S. I. Janna

The influence of the viscosity classification of an acrylic bone cement on its in vitro fatigue performance, Gladius Lewis and Si Janna

Link

The in vitro elution of gentamicin sulfate from a commercially available gentamicin-loaded acrylic bone cement, VersaBond™ AB, Gladius Lewis and Si Janna

Link

Estimation of the minimum number of test specimens for fatigue testing of acrylic bone cement, Gladius Lewis and Anupama Sadhasivini