Submissions from 2017
Axisymmetric planar cracks in finite hollow cylinders of transversely isotropic material: Part II—cutting method for finite cylinders, M. Pourseifi, R. T. Faal, and E. Asadi
Peroxisomal Disorders, Gerald V. Raymond, Kristin W. Barañano, and S. Ali Fatemi
Mechanical Characterization of EuD4TEA- and ZnS:Mn-Enhanced Composites, Margaret Scheiner, Kunal Joshi, Okenwa I. Okoli, and Tarik J. Dickens
Design-Driven Modeling of Surface-Textured Full-Film Lubricated Sliding: Validation and Rationale of Nonstandard Thrust Observations, Jonathon K. Schuh, Yong Hoon Lee, James T. Allison, and Randy H. Ewoldt
Prediction of clinically relevant initiation and progression of tears within annulus fibrosus, Narjes Momeni Shahraki, Ali Fatemi, Anand Agarwal, and Vijay K. Goel
Advances of bio-inspired in-situ triboluminescent optical fiber sensor for damage and load monitoring in multifunctional composite, Md Abu Shohag, Taniwa Ndebele, David Olawale, and Okenwa Okoli
Damage mitigation techniques in wind turbine blades: A review, Md Abu S. Shohag, Emily C. Hammel, David O. Olawale, and Okenwa I. Okoli
Fatigue crack behavior in power plant residual heat removal system piping including weld residual stress effects, S. Taheri and A. Fatemi
Laser-induced graphitic healing of carbon nanotubes aligned in a sheet, H. H. Van, K. Badura, R. Liang, O. Okoli, and M. Zhang
On the geometric conditions for multiple stable equilibria in clamped arches, L. N. Virgin, Y. Guan, and R. H. Plaut
Phase-field crystal modeling: Integrating density functional theory, molecular dynamics, and phase-field modeling, Mohsen Asle Zaeem and Ebrahim Asadi
Submissions from 2016
The anisotropy of hexagonal close-packed and liquid interface free energy using molecular dynamics simulations based on modified embedded-atom method, Ebrahim Asadi and Mohsen Asle Zaeem
Predicting solidification properties of magnesium by molecular dynamics simulations, Ebrahim Asadi and Mohsen Asle Zaeem
Crack Paths 2015 (after CP 2015), Andrea Carpinteri, Roberto Brighenti, Ali Fatemi, and Luca Susmel
Creep behavior and modeling of neat, talc-filled, and short glass fiber reinforced thermoplastics, Mohammadreza Eftekhari and Ali Fatemi
Creep-fatigue interaction and thermo-mechanical fatigue behaviors of thermoplastics and their composites, Mohammadreza Eftekhari and Ali Fatemi
On the strengthening effect of increasing cycling frequency on fatigue behavior of some polymers and their composites: Experiments and modeling, Mohammadreza Eftekhari and Ali Fatemi
Tensile behavior of thermoplastic composites including temperature, moisture, and hygrothermal effects, Mohammadreza Eftekhari and Ali Fatemi
Fatigue Behavior of Neat and Short Glass Fiber Reinforced Polymers under Two-Step Loadings and Periodic Overloads, Mohammadreza Eftekhari, Ali Fatemi, and Abolhassan Khosrovaneh
Revisiting phase diagrams of two-mode phase-field crystal models, Arezoo Emdadi, Mohsen Asle Zaeem, and Ebrahim Asadi
Wake meandering statistics of a model wind turbine: Insights gained by large eddy simulations, Daniel Foti, Xiaolei Yang, Michele Guala, and Fotis Sotiropoulos
Measurement of impact force for triboluminescent-enhanced composites by modified impulse method, Jolie Frketic, Natalia Ariza, David Olawale, Okenwa Okoli, Tarik Dickens, and Nydeia Bolden Frazier
Fatigue crack growth behavior in the presence of notches and multiaxial nominal stress states, Nicholas Gates and Ali Fatemi
Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms, Nicholas Gates and Ali Fatemi
Multiaxial variable amplitude fatigue life analysis including notch effects, Nicholas Gates and Ali Fatemi
Notch deformation and stress gradient effects in multiaxial fatigue, Nicholas Gates and Ali Fatemi
A simplified cyclic plasticity model for calculating stress-strain response under multiaxial non-proportional loadings, Nicholas R. Gates and Ali Fatemi
Interaction of shear and normal stresses in multiaxial fatigue damage analysis, Nicholas R. Gates and Ali Fatemi
Fatigue crack growth behavior under multiaxial variable amplitude loading, Nicholas R. Gates, Ali Fatemi, Nagaraja Iyyer, and Nam Phan
Solvated electrons at the atmospheric pressure plasma-water anodic interface, R. Gopalakrishnan, E. Kawamura, A. J. Lichtenberg, M. A. Lieberman, and D. B. Graves
A Novel Closed-Head Model of Mild Traumatic Brain Injury Using Focal Primary Overpressure Blast to the Cranium in Mice, Natalie H. Guley, Joshua T. Rogers, Nobel A. Del Mar, Yunping Deng, Rafiqul M. Islam, Lauren D'Surney, Jessica Ferrell, and Bowei Deng
Recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium, Amir Hadadzadeh, Sugrib Kumar Shaha, Mary A. Wells, Hamid Jahed, and Bruce W. Williams
Warm and Hot Deformation Behavior of As-Cast ZEK100 Magnesium Alloy, Amir Hadadzadeh, Mary A. Wells, and Amjad Javaid
Development and Experimental Validation of a Physics-Based PEM Fuel Cell Model for Cathode Humidity Control Design, Alexander Headley, Victor Yu, Russell Borduin, Dongmei Chen, and Wei Li
Functional triboluminescent nanophase for use in advanced structural materials: A smart premise with molecular and electronic definition, M. Jasim Uddin, David O. Olawale, Jin Yan, Justin Moore, and Okenwa O.I. Okoli
Deformation and fatigue behaviors of carburized automotive gear steel and predictions, Bonglae Jo, Yongbo Shim, Shahriar Sharifimehr, and Ali Fatemi
Shape parameterization comparison for full-film lubrication texture design, Yong Hoon Lee, Jonathon Schuh, Randy H. Ewoldt, and James T. Allison
Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research, P. Li, D. H. Warner, A. Fatemi, and N. Phan
On the fatigue performance of additively manufactured Ti-6Al-4V to enable rapid qualification for aerospace applications, P. Li, D. H. Warner, A. Fatemi, and N. Phan
Synthesis and characterization of polystyrene carbon nanotube nanocomposite for utilization in the displaced foam dispersion methodology, Micah McCrary-Dennis, M. Jasim Uddin, and Okenwa I. Okoli
Effects of mean stress and stress concentration on fatigue behavior of short fiber reinforced polymer composites, S. Mortazavian and A. Fatemi
Estimation of in-situ compositions in lean gas condensate reservoirs, H. R. Nasriani, E. Asadi, C. Johnson, M. Nasriani, and A. Chamchine
Introduction to triboluminescence, David O. Olawale, Ross S. Fontenot, Md Abu S. Shohag, and Okenwa O.I. Okoli
Preface, David O. Olawale, Okenwa O.I. Okoli, Ross S. Fontenot, and William A. Hollerman
Triboluminescence: Theory, synthesis, and application, David O. Olawale, Okenwa O.I. Okoli, Ross S. Fontenot, and William A. Hollerman
Triboluminescent sensors for cement-based composites, David O. Olawale, Jasim M. Uddin, Jin Yan, Tarik J. Dickens, and Okenwa O.I. Okoli
In pursuit of bio-inspired triboluminescent multifunctional composites, David O. Olawale, Jin Yan, Divyesh H. Bhakta, Donovan Carey, Tarik J. Dickens, and Okenwa I. Okoli
Influence of assigned material combination in a simulated total cervical disc replacement design on kinematics of a model of the full cervical spine: A finite element analysis study, Yuxin Qi and Gladius Lewis
Adaptive beamforming based on Snell's law of reflection, Alfonso Rodriguez-Molares, Ali Fatemi, Hans Torp, and Lasse Lovstakken
Progress towards self-healing polymers for composite structural applications, Margaret Scheiner, Tarik J. Dickens, and Okenwa Okoli
Synthesis conditions of europium tetrakis dibenzoylmethide triethylammonium crystals, Margaret Scheiner, Tarik J. Dickens, and Okenwa Okoli
Fatigue behavior of AHSS lap shear and butt arc welds including the effect of periodic overloads and underloads, Shahriar Sharifimehr, Ali Fatemi, Sung Chul Cha, Moon Ki Bae, and Seung Hyun Hong
Triboluminescent sensor network for load monitoring in wind turbine blades, Md Abu S. Shohag, Emily C. Hammel, Yourri Samuel Dessureault, Kunal Joshi, David O. Olawale, Tarik J. Dickens, and Okenwa I. Okoli
Adhesive bond failure monitoring with triboluminescent optical fiber sensor, Md Abu S. Shohag, Emily C. Hammel, David O. Olawale, and Okenwa O. Okoli
Microstructure evolution and simulation study of a duplex Mg-Li alloy during Double Change Channel Angular Pressing, Guobing Wei, Yahya Mahmoodkhani, Xiaodong Peng, Amir Hadadzadeh, Tiancai Xu, Junwei Liu, Weidong Xie, and Mary A. Wells
Deformation behavior and constitutive model for dual-phase Mg-Li alloy at elevated temperatures, Guo Bing Wei, Xiao Dong Peng, Fa Ping Hu, Amir Hadadzadeh, Yan Yang, Wei Dong Xie, and Mary A. Wells
Buckypaper-cored novel photovoltaic sensors for in-situ structural health monitoring of composite materials using hybrid quantum dots, Jin Yan, Deborah E. Daramola, Julian M. Antolinez, Nnamdi Okoli, Tarik J. Dickens, and Okenwa I. Okoli
3d sensing using solid-state wire-shaped photovoltaic sensor in tl-based structural health monitoring, Jin Yan, M. Jasim Uddin, David O. Olawale, Tarik J. Dickens, and Okenwa O.I. Okoli
Submissions from 2015
Noise-influenced response of duffing oscillator, Vipin Agarwal and Balakumar Balachandran
Micromechanics predictions for two-phased nanocomposites and three-phased multiscale composites: A review, Chelsea E.E. Armbrister, Okenwa I. Okoli, and Sachin Shanbhag
A modified two-mode phase-field crystal model applied to face-centered cubic and body-centered cubic orderings, Ebrahim Asadi and Mohsen Asle Zaeem
A Review of Quantitative Phase-Field Crystal Modeling of Solid–Liquid Structures, Ebrahim Asadi and Mohsen Asle Zaeem
Quantifying a two-mode phase-field crystal model for BCC metals at melting point, Ebrahim Asadi and Mohsen Asle Zaeem
Quantitative modeling of the equilibration of two-phase solid-liquid Fe by atomistic simulations on diffusive time scales, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Two-phase solid-liquid coexistence of Ni, Cu, and Al by molecular dynamics simulations using the modified embedded-atom method, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Stretchlon film-enhanced ridft process for composite manufacture, Divyesh H. Bhakta, David O. Olawale, Tarik Dickens, and Okenwa I. Okoli
Healthcare engineering defined: A white paper, Ming Chien Chyu, Tony Austin, Fethi Calisir, Samuel Chanjaplammootil, Mark J. Davis, Jesus Favela, Heng Gan, and Amit Gefen
Characterization of triboluminescent enhanced discontinuous glass-fiber composite beams for micro-damage detection and fracture assessment, Tarik Dickens, Chelsea Armbrister, David Olawale, and Okenwa Okoli
Tensile, creep and fatigue behaviours of short fibre reinforced polymer composites at elevated temperatures: A literature survey, M. Eftekhari and A. Fatemi
Fatigue Behavior and Predictive Modeling of Short Fiber Thermoplastic Composites, Ali Fatemi, Seyyedvahid Mortazavian, and Abolhasan Khosrovaneh
Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing, Nicholas R. Gates and Ali Fatemi
Fatigue life of 2024-T3 aluminum under variable amplitude multiaxial loadings: Experimental results and predictions, Nicholas R. Gates and Ali Fatemi
The bipolar diffusion charging of nanoparticles: A review and development of approaches for non-spherical particles, Ranganathan Gopalakrishnan, Peter H. McMurry, and Christopher J. Hogan
The electrical mobilities and scalar friction factors of modest-to-high aspect ratio particles in the transition regime, Ranganathan Gopalakrishnan, Peter H. McMurry, and Christopher J. Hogan
Inverse and centreline segregation formation in twin roll cast AZ31 magnesium alloy, A. Hadadzadeh and M. A. Wells
Control oriented discretized cathode control volume method for improved PEM fuel cell modeling, Alexander J. Headley and Dongmei Chen
Critical control volume sizing for improved transient thermal modeling of PEM fuel cells, Alexander J. Headley and Dongmei Chen
Not all approved antibiotic-loaded PMMA bone cement brands are the same: ranking using the utility materials selection concept, Gladius Lewis
Fabrication of silicon nanowire on freestanding multiwalled carbon nanotubes by chemical vapor deposition, Teng Liu, Richard Liang, Okenwa Okoli, and Mei Zhang
Fatigue Behavior of Cast Iron Including Mean Stress Effects, Nicholas Meyer, Ali Fatemi, Steven McCutcheon, Brian Havard, and William Fairchilds
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites, Seyyedvahid Mortazavian and Ali Fatemi
Fatigue behavior and modeling of short fiber reinforced polymer composites: A literature review, Seyyedvahid Mortazavian and Ali Fatemi
Fatigue behavior and modeling of short fiber reinforced polymer composites including anisotropy and temperature effects, Seyyedvahid Mortazavian and Ali Fatemi
Effect of Water Absorption on Tensile and Fatigue Behaviors of Two Short Glass Fiber Reinforced Thermoplastics, Seyyedvahid Mortazavian, Ali Fatemi, and Abolhassan Khosrovaneh
Effect of cycling frequency and self-heating on fatigue behavior of reinforced and unreinforced thermoplastic polymers, Seyyedvahid Mortazavian, Ali Fatemi, Stephen R. Mellott, and Abolhassan Khosrovaneh
Tensile and fatigue behaviors of polymers for automotive applications, S. Mortazavian and A. Fatemi
Challenges of fluid phase behavior modeling in Iranian retrograde gas condensate reservoirs, H. R. Nasriani, E. Asadi, M. Nasiri, L. Khajenoori, and M. Masihi
Triboluminescent composite with in-situ impact sensing capability, David Olawale, Divyesh Bhakta, Emily Hammel, Jin Yan, Donovan Carey, Tarik Dickens, and Okenwa I. Okoli
On the use of biaxial properties in modeling annulus as a Holzapfel-Gasser-Ogden material, Narjes Momeni Shahraki, Ali Fatemi, Vijay K. Goel, and Anand Agarwal
Microstructure evolution and mechanical properties of Mg-9Li-3Al-2Sr alloy in change channel angular pressing, G. Wei, X. Peng, J. Liu, A. Hadadzadeh, Y. Yang, and W. Xie
Constitutive modeling of Mg-9Li-3Al-2Sr-2Y at elevated temperatures, Guobing Wei, Xiaodong Peng, Amir Hadadzadeh, Yahya Mahmoodkhani, Weidong Xie, Yan Yang, and Mary A. Wells
Influence of I-phase and W-phase on microstructure and mechanical properties of Mg-8Li-3Zn alloy, Guo Bing Wei, Xiao Dong Peng, Bao Zhang, Amir Hadadzadeh, Tian Cai Xu, and Wei Dong Xie
Submissions from 2014
Phase-field crystal model for Fe connected to MEAM molecular dynamics simulations, Ebrahim Asadi, Mohsen Asle Zaeem, and Michael I. Baskes
Effect of vacancy defects on generalized stacking fault energy of fcc metals, Ebrahim Asadi, Mohsen Asle Zaeem, Amitava Moitra, and Mark A. Tschopp
Flame and flow topologies in an annular swirling flow, I. Chterev, C. W. Foley, D. Foti, S. Kostka, A. W. Caswell, N. Jiang, A. Lynch, and D. R. Noble
Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings, Ali Fatemi, Nicholas Gates, Darrell F. Socie, and Nam Phan
Tensile and fatigue behaviors of two thermoplastics including strain rate, temperature, and mean stress effects, Ali Fatemi, Steve Mellot, Abolhassan Khosrovaneh, and Charles Buehler
Special Issue on 'Multiaxial Fracture 2013': Selected papers from the 10th International Conference on Multiaxial Fatigue and Fracture (ICMFF10), held in Kyoto, Japan, on 3-6 June 2013, Ali Fatemi, Les P. Pook, Andrea Spagnoli, and Shan Tung Tu
Expanding and improving the integration of multidisciplinary projects in a capstone senior design course: Experience gained and future plans, Michael P. Frank, Kamal E. Amin, Okenwa I. Okoli, Robert A. Van Engelen, and Chiang Shih
Notched fatigue behavior and stress analysis under multiaxial states of stress, Nicholas Gates and Ali Fatemi
