Submissions from 2002
Modeling and prediction of magnetic storage and reorientation of LOX in reduced gravity, Jeff G. Marchetta, John I. Hochstein, Daniel R. Sauter, and Benjamin D. Simmons
A literature survey on fatigue analysis approaches for rubber, W. V. Mars and A. Fatemi
Mining protein sequences for motifs, Giri Narasimhan, Changsong Bu, Yuan Gao, Xuning Wang, Ning Xu, and Kalai Mathee
An attempt at predicting failure in a random glass/epoxy composite laminate, Okenwa I. Okoli and Aimullotfi Abdul-Latif
Failure in composite laminates: Overview of an attempt at prediction, Okenwa I. Okoli and Ainullotfi Abdul-Latif
Regulation of proto-Dbl by intracellular membrane targeting and protein stability, Cristina Vanni, Patrizia Mancini, Yuan Gao, Catherine Ottaviano, Fukun Guo, Barbara Salani, Maria Rosaria Torrisi, Yi Zheng, and Alessandra Eva
Submissions from 2001
DELPHI: A pattern-based method for detecting sequence similarity, A. Floratos, I. Rigoutsos, L. Parida, and Y. Gao
Trp56 of Rac1 Specifies Interaction with a Subset of Guanine Nucleotide Exchange Factors, Yuan Gao, Jingchuan Xing, Michel Streuli, Thomas L. Leto, and Yi Zheng
Properties of crosslinked ultra-high-molecular-weight polyethylene, Gladius Lewis
Effect of crosslinking UHMWPE on its tensile and compressive creep performance, Gladius Lewis and Michael Carroll
Simulation and prediction of magnetic cryogenic propellant positioning in reduced gravity, Jeff G. Marchetta, John I. Hochstein, and Daniel R. Sauter
An approach for obtaining the young's modulus in woven glass/epoxy reinforced composites, O. I. Okoli
The effects of strain rate and failure modes on the failure energy of fibre reinforced composites, Okenwa I. Okoli
QSAR in grossly underdetermined systems: Opportunities and issues, D. E. Platt, L. Parida, Y. Gao, A. Floratos, and I. Rigoutsos
Modulation of Oncogenic DBL Activity by Phosphoinositol Phosphate Binding to Pleckstrin Homology Domain, Chiara Russo, Yuan Gao, Patrizia Mancini, Cristina Vanni, Matteo Porotto, Marco Falasca, Maria Rosaria Torrisi, Yi Zheng, and Alessandra Eva
Microgravity propellant tank geyser analysis and prediction, Randall J. Thornton and John I. Hochstein
Data in clinical studies of volumetric wear rates [4] (multiple letter), B. M. Wroblewski and G. Lewis
Elasto-plastic stress and strain behaviour at notch roots under monotonic and cyclic loadings, Z. Zeng and A. Fatemi
Oligomerization of Rac1 GTPase Mediated by the Carboxyl-terminal Polybasic Domain, Baolin Zhang, Yuan Gao, Sun Young Moon, Yaqin Zhang, and Yi Zheng
Submissions from 2000
DACUM...A tool for documenting industrial involvement in curriculum design, Deborah J. Hochstein and John I. Hochstein
A "boundary layer" method for obtaining an approximate equation for the unsteady velocity-time history of flow startup in a pipe, William S. Janna and John I. Hochstein
Hydroxyapatite-coated bioalloy surfaces: Current status and future challenges, G. Lewis
Relative influence of composition and viscosity of acrylic bone cement on its apparent fracture toughness, Gladius Lewis
Correlation between impact strength and fracture toughness of PMMA-based bone cements, Gladius Lewis and Scott Mladsi
Relationship between fracture toughness and impact strength of acrylic bone cement, Gladius Lewis and Scott Mladsi
Toward standardization of methods of determination of fracture properties of acrylic bone cement and statistical analysis of test results, Gladius Lewis and Jeffry S. Nyman
Simulation and dimensionless modeling of magnetically induced reorientation, Jeff G. Marchetta and John I. Hochstein
Wear rate of polyethylene bearing components [1] (multiple letters), B. F. Morrey and G. Lewis
Development of a semi-empirical method for obtaining the dynamic Young's modulus in random continuous reinforced glass/epoxy composites, O. I. Okoli and G. F. Smith
High Strain Rate Characterization of a Glass/Epoxy Composite, O. I. Okoli and G. F. Smith
The effect of strain rate and fibre content on the Poisson's ratio of glass/epoxy composites, O. I. Okoli and G. F. Smith
Pattern discovery on character sets and real-valued data: Linear bound on irredundant motifs and an efficient polynomial time algorithm, Laxmi Parida, Isidore Rigoutsos, Aris Floratos, Dan Platt, and Yuan Gao
The emergence of pattern discovery techniques in computational biology, Isidore Rigoutsos, Aris Floratos, Laxmi Parida, Yuan Gao, and Daniel Platt
Strain-controlled fatigue properties of steels and some simple approximations, M. L. Roessle and A. Fatemi
Submissions from 1999
Sequence homology detection through large scale pattern discovery, Aris Floratos, Isidore Rigoutsos, Laxmi Parida, Gustavo Stolovitzky, and Yuan Gao
Motif detection in protein sequences, Yuan Gao, Kalai Mathee, Giri Narasimhan, and Xuning Wang
Direct competency testing - Is it for you?, John I. Hochstein and Edward H. Perry
Biomechanics as a basis for management of intra-articular fractures of the calcaneus., G. Lewis
Apparent fracture toughness of acrylic bone cement: Effect of test specimen configuration and sterilization method, Gladius Lewis
Effect of mixing method and storage temperature of cement constituents on the fatigue and porosity of acrylic bone cement, Gladius Lewis
Effect of two variables on the fatigue performance of acrylic bone cement: Mixing method and viscosity, Gladius Lewis
A new method of determining the J-integral fracture toughness of very tough polymers: Application to ultra high molecular weight polyethylene, Gladius Lewis and Jeffry S. Nyman
Localization of the PAK1-, WASP-, and IQGAP1-specifying regions of Cdc42, Rong Li, Balazs Debreceni, Baoqing Jia, Yuan Gao, Gabor Tigyi, and Yi Zheng
Fluid capture by a permanent ring magnet in reduced gravity, J. G. Marchetta and J. I. Hochstein
Aspects of the tensile response of random continuous glass/epoxy composites, Okenwa I. Okoli and G. F. Smith
Dictionary building via unsupervised hierarchical motif discovery in the sequence space of natural proteins, Isidore Rigoutsos, Aris Floratos, Christos Ouzounis, Yuan Gao, and Laxmi Parida
Building Dictionaries Of 1D and 3D Motifs By Mining The Unaligned 1D Sequences Of 17 Archaeal and Bacterial Genomes, Isidore Rigoutsos, Yuan Gao, Aris Floratos, and Laxmi Parida
Variation in cyclic deformation and strain-controlled fatigue properties using different curve fitting and measurement techniques, Matthew L. Roessle, Ali Fatemi, and Abolhassan K. Khosrovaneh
Using computers in teaching gas dynamics, Sam Thomason, John Hochstein, Tom Benson, and Jeff Marchetta
Submissions from 1998
Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials, A. Fatemi and L. Yang
Shear bond strength of immediately repaired light-cured composite resin restorations, G. Lewis, W. Johnson, W. Martin, A. Canerdy, C. Claburn, and M. Collier
Contact stress at articular surfaces in total joint replacements. Part I: Experimental methods, Gladius Lewis
Contact stress at articular surfaces in total joint replacements. Part II: Analytical and numerical methods, Gladius Lewis
Fracture toughness and quantitative computed tomography number of human tibia cortical bone, Gladius Lewis
Geometrical Properties and Torsional Fatigue Life of a Tibial Interlocking Intramedullary Nail Segment, Gladius Lewis and Donna Holland
Effect of material property representation on stresses in endoprostheses, Gladius Lewis, Vinod Jonathan, and Sarma Kambhampati
Effect of thermal spray process for depositing hydroxyapatite coating on a titanium alloy on its fatigue performance, Gladius Lewis and Bobby McVay
Effect of sterilization method on properties of Palacos® R acrylic bone cement, Gladius Lewis and Scott Mladsi
Relationship between fracture toughness and impact strength of acrylic bone cement, Gladius Lewis and Scott Mladsi
A methodology for examining the plausibility of accelerated aging protocols for UHMWPE components, Gladius Lewis, Jeffry S. Nyman, and Hai H. Trieu
The apparent fracture toughness of acrylic bone cement: Effect of three variables, Gladius Lewis, Jeffry Nyman, and Hai H. Trieu
Dynamic thermomechanical properties and crystallinity of ultrahigh molecular weight polyethylene tibial inserts, Gladius Lewis, Christopher Rogers, and Hai H. Trieu
Failure modes of fibre reinforced composites: The effects of strain rate and fibre content, O. I. Okoli and G. F. Smith
Aspects of the tensile response of random continuous glass/epoxy composites, Okenwa I. Okoli and G. F. Smith
Cumulative Fatigue Damage Mechanisms and Quantifying Parameters: A Literature Review, L. Yang and A. Fatemi
Submissions from 1997
Magnetically actuated propellant orientation (MAPO) experiment: Pre flight flow field predictions, J. I. Hochstein, R. T. Warren, and George R. Schmidt
Evaluation of tibial interlocking intramedullary nails, Gladius Lewis
Mechanical evaluation of humeral interlocking intramedullary nails, Gladius Lewis
Polyethylene wear in total hip and knee arthroplasties, Gladius Lewis
Properties of acrylic bone cement: State of the art review, Gladius Lewis
Effect of the archwire slot profile on the performance of bonded orthodontic brackets, Gladius Lewis, Sarma Kambhampati, and Stephanie Roussel
Effect of mixing method on selected properties of acrylic bone cement, Gladius Lewis, Jeffry S. Nyman, and Hai H. Trieu
Modeling the tensile behavior of human Achilles tendon, Gladius Lewis and Kevin M. Shaw
Tensile properties of human tendo Achillis: Effect of donor age and strain rate, Gladius Lewis and Kevin M. Shaw
Tensile properties of human Achilles tendon, Kevin M. Shaw and Gladius Lewis
Submissions from 1996
An implicit surface tension model, J. I. Hochstein and T. L. Williams
Volume tracking of interfaces having surface tension in two and three dimensions, D. B. Kothe, W. J. Rider, S. J. Mosso, J. S. Brock, and J. I. Hochstein
Characterization of the performance of external hip protector materials, Gladius Lewis
Sizing of the array for stand-alone photovoltaic systems, Gladius Lewis
The elbow joint and its total arthroplasty. Part I. A state-of-the-art review, Gladius Lewis
The elbow joint and its total arthroplasty. Part II. Finite element study, Gladius Lewis, M. C. Clark, Mark S. Harber, and Michael Vaughan
Parametric stress analysis of bonded "combination-materials" type of orthodontic brackets, Gladius Lewis, Saravanakumar Manickam, and Foch M. Smart
Effect of debonding forces on bonded orthodontic brackets: Finite element study, Gladius Lewis, Saravanakumar Manickam, and Darrison Wharton
Impact response of glass fibre reinforced composites: A comparison between finite element results and experimental data, O. Izeji Okoli, A. Abdul-Latif, and G. F. Smith
Fatigue crack growth under mixed-mode I and II loading, J. Qian and A. Fatemi
Mixed mode fatigue crack growth: A literature survey, J. Qian and A. Fatemi
Optimization of the clubface shape of a golf driver to minimize dispersion of off-center shots, D. C. Winfield and Teong E. Tan
Impact resistance and fracture toughness of vanadium-based microalloyed forging steel in the as-forged and Q&T conditions, L. Yang and A. Fatemi
An overview of microalloyed steels, part II: Their mechanical behavior, Linsheng Yang, Ali Fatemi, Don A. Rhoda, and James E. Tripp
An overview of microalloyed steels, part I: Metallurgical aspects, Linsheng Yang, Ali Fatemi, Don A. Rhoda, and James E. Tripp
Submissions from 1995
A computational model for solidifying flows, J. I. Hochstein, T. A. Fletcher, and D. E. Kothe
Computational study of thermocapdulary convection tn a float-zone, J. I. Hochstein and G. P. Sasmal
Design of a device for measuring pump performance in the fluid mechanics laboratory, John I. Hochstein and William S. Janna
The total wrist joint arthroplasty: biomechanical considerations and research directions., G. Lewis
Estimates of monthly mean daily diffuse irradiation in the Southeastern United States, Gladius Lewis
A thoracic spine testbed for the comparative biomechanical evaluation of spinal instrumentations, Gladius Lewis, Troy D. Drewry, and Michael C. Sherman
Characterization of biomedical polymer surface interaction with human factor xa, Gladius Lewis, John Newman, and William Katz
Orthopaedic alloy electrochemical behavior: the case of Ti-6Al-7Nb, Gladius Lewis and Kevin M. Shaw
