Submissions from 2022
Antibiotic-free antimicrobial poly (methyl methacrylate) bone cements: A state-of-the-art review
Thermomechanical Simulation of an Aerogel/RTV Based Cryogenic Propellant Tank, Dalton Bowen and Jeffery Marchetta
Indentation strain rate sensitivity of laser-powder bed fused and electron beam melted Ti–6Al–4V, Harish Chandra Kaushik, Shawkat Imam Shakil, Babak Shalchi Amirkhiz, Mohsen Mohammadi, Ebrahim Asadi, Meysam Haghshenas, and Amir Hadadzadeh
Heat treatment of Ti-6Al-4V alloy manufactured by laser-based powder-bed fusion: Process, microstructures, and mechanical properties correlations, Seyed Alireza Etesami, Behzad Fotovvati, and Ebrahim Asadi
The influence of Pb content on the interfacial free energy of solid Sn in eutectic Pb–Sn liquid mixtures using molecular dynamics simulations, Seyed Alireza Etesami, Mohamed Laradji, and Ebrahim Asadi
Simulation of Bulk Evaporation and Condensation using the Energy of Fluid Method, Elijah Gasmen and Jeffrey G. Marchetta
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, part II: Data correlations and life estimations, Reza Molaei, Ali Fatemi, and Nam Phan
A reduced-order model for the near wake dynamics of a wind turbine: Model development and uncertainty quantification, Ala' E. Qatramez and Daniel Foti
Post fabrication thermomechanical processing of additive manufactured metals: A review, Shawkat Imam Shakil, Noah Robert Smith, Samuel Paul Yoder, Brenden Edward Ross, Dylan James Alvarado, Amir Hadadzadeh, and Meysam Haghshenas
A phase field crystal model for materials crystallization in the presence of nanoscale pores, Abash Sharma, Ebrahim Asadi, and Mohamed Laradji
Submissions from 2021
A fatigue damage model for life prediction of injection-molded short glass fiber-reinforced thermoplastic composites, Mohammad Amjadi and Ali Fatemi
Creep behavior and modeling of high-density polyethylene (HDPE), Mohammad Amjadi and Ali Fatemi
Microstructure and Fatigue Damage Evolution in Additive-Manufactured Metals Using Enhanced Measurement Techniques and Modeling Approaches, M. Awd, F. Walther, S. Siddique, and A. Fatemi
Test Anxiety and Its Impact on Diverse Undergraduate Engineering Students during Remote Learning, David A. Copp and Alexander J. Headley
Coherent vorticity dynamics and dissipation in a utility-scale wind turbine wake with uniform inflow, Daniel Foti
Subgrid-scale characterization and asymptotic behavior of multidimensional upwind schemes for the vorticity transport equations, Daniel Foti and Karthik Duraisamy
Microstructural consistency in the additive manufactured metallic materials: A study on the laser powder bed fusion of AlSi10Mg, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Brian Langelier, Jian Li, and Mohsen Mohammadi
Indentation-derived mechanical properties of Ti-6Al-4V: Laser-powder bed fusion versus electron beam melting, Amir Hadadzadeh, Ebrahim Asadi, Shawkat Imam Shakil, Babak Shalchi Amirkhiz, Mohsen Mohammadi, and Meysam Haghshenas
Least cost microgrid resource planning for the natural energy laboratory of Hawaii authority Research Park, Alexander Headley, Benjamin Schenkman, Keith Olson, and Laurence Sombardier
An experimentally validated model of diffusion charging of arbitrary shaped aerosol particles, Li Li and Ranganathan Gopalakrishnan
Energy storage versus demand side management for peak-demand reduction at the Hawaii ocean science and technology park, Yogesh Manoharan, Alexander Headley, Keith Olson, Laurence Sombardier, and Benjamin Schenkman
Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: Experiments and modelling, Reza Molaei and Ali Fatemi
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys, Reza Molaei, Ali Fatemi, and Nam Phan
Fatigue performance and life prediction of cast aluminum under axial, torsion, and multiaxial loadings, Ahmad Nourian-Avval and Ali Fatemi
Variable amplitude fatigue behavior and modeling of cast aluminum, Ahmad Nourian-Avval and Ali Fatemi
Reduced-order model predictions of wind turbines via mode decomposition and sparse sampling, Ala’ E. Qatramez and Daniel Foti
A hybrid additively manufactured martensitic-maraging stainless steel with superior strength and corrosion resistance for plastic injection molding dies, Javad Samei, Hamed Asgari, Concetta Pelligra, Mehdi Sanjari, Saied Salavati, Ayda Shahriari, Maedeh Amirmaleki, and Mohammad Jahanbakht
Defect-based fatigue life prediction of L-PBF additive manufactured metals, Niloofar Sanaei and Ali Fatemi
Defect-based multiaxial fatigue life prediction of L-PBF additive manufactured metals, Niloofar Sanaei and Ali Fatemi
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review, Niloofar Sanaei and Ali Fatemi
Corrosion resistance of 13wt.% Cr martensitic stainless steels: Additively manufactured CX versus wrought Ni-containing AISI 420, Ayda Shahriari, Mahya Ghaffari, Ladan Khaksar, Ali Nasiri, Amir Hadadzadeh, Babak Shalchi Amirkhiz, and Mohsen Mohammadi
Indentation-derived creep response of cast and laser powder bed fused AlSi10Mg alloy: Air temperature, S. I. Shakil, A. Hadadzadeh, H. Pirgazi, M. Mohammadi, and M. Haghshenas
Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics, S. I. Shakil, A. Hadadzadeh, B. Shalchi Amirkhiz, H. Pirgazi, M. Mohammadi, and M. Haghshenas
Tutorial: Langevin Dynamics methods for aerosol particle trajectory simulations and collision rate constant modeling, Vikram Suresh and Ranganathan Gopalakrishnan
Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements, Vikram Suresh, Li Li, Joshua Redmond Go Felipe, and Ranganathan Gopalakrishnan
Submissions from 2020
Scalable generation of high concentration aerosol in the size range of 0.1–10 μm from commercial powders using ultrasonic dispersion, Rayhan Ahmed, Vikram Suresh, Li Li, and Ranganathan Gopalakrishnan
Dynamic compressive response of electron beam melted Ti–6Al–4V under elevated strain rates: Microstructure and constitutive models, Reza Alaghmandfard, Dharmendra Chalasani, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Akindele Odeshi, and Mohsen Mohammadi
Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties, F. Alghamdi, X. Song, A. Hadadzadeh, B. Shalchi-Amirkhiz, M. Mohammadi, and M. Haghshenas
Creep and fatigue behaviors of High-Density Polyethylene (HDPE): Effects of temperature, mean stress, frequency, and processing technique, Mohammad Amjadi and Ali Fatemi
Multiaxial fatigue behavior of thermoplastics including mean stress and notch effects: Experiments and modeling, Mohammad Amjadi and Ali Fatemi
Tensile behavior of high-density polyethylene including the effects of processing technique, thickness, temperature, and strain rate, Mohammad Amjadi and Ali Fatemi
Surface roughness and densification correlation for direct metal laser sintering, Faridreza Attarzadeh, Behzad Fotovvati, Michael Fitzmire, and Ebrahim Asadi
Towards deterministic computation of internal stresses in additively manufactured materials under fatigue loading: Part I, Mustafa Awd, Mhd Fateh Labanie, Kerstin Moehring, Ali Fatemi, and Frank Walther
Fatigue assessment of 17-4 PH stainless steel notched specimens made by direct metal laser sintering, Filippo Berto, Ali Fatemi, Nima Shamsaei, and Seyed Mohammad Javad Razavi
Opportunities and trends for energy storage plus solar in the CAISO real-time market: 2014-2018, Raymond H. Byrne, Tu A. Nguyen, Alexander Headley, and Rodrigo D. Trevizan
Opportunities and Trends for Energy Storage plus Solar in CAISO: 2014-2018, Raymond H. Byrne, Tu A. Nguyen, Alexander Headley, Felipe Wilches-Betnal, Ricky Concepcion, and Rodrigo D. Trevizan
Special Issue on ‘Multiaxial Fatigue 2019’: Selected papers from the 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF12), held in Bordeaux, France, on 24-26 June 2019, Andrea Carpinteri, Fionn P.E. Dunne, Ali Fatemi, Franck Morel, and Thierry Palin-Luc
The role of titanium on the microstructure and mechanical properties of additively manufactured C300 maraging steels, S. Dehgahi, M. H. Ghoncheh, A. Hadadzadeh, M. Sanjari, B. Shalchi Amirkhiz, and M. Mohammadi
Influence of build orientation on small-scale properties of electron beam melted Ti-6Al-4V, C. Dharmendra, R. Alaghmandfard, A. Hadadzadeh, B. S. Amirkhiz, and M. Mohammadi
Deformation mechanisms and fracture of electron beam melted Ti–6Al–4V, C. Dharmendra, A. Hadadzadeh, B. S. Amirkhiz, A. Lloyd, and M. Mohammadi
Reliability of molecular dynamics interatomic potentials for modeling of titanium in additive manufacturing processes, S. Alireza Etesami, Mohamed Laradji, and Ebrahim Asadi
Novel specimen geometries for fatigue testing of additive manufactured metals under axial, torsion, and combined axial-torsion loadings, Ali Fatemi and Reza Molaei
Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications, A. Fatemi, R. Molaei, and N. Phan
An adaptive mesh refinement approach based on optimal sparse sensing, Daniel Foti, Sven Giorno, and Karthik Duraisamy
Modeling and optimization approaches of laser-based powder-bed fusion process for ti-6al-4v alloy, Behzad Fotovvati, Madhusudhanan Balasubramanian, and Ebrahim Asadi
On the solidification characteristics, deformation, and functionally graded interfaces in additively manufactured hybrid aluminum alloys, M. H. Ghoncheh, M. Sanjari, E. Cyr, J. Kelly, H. Pirgazi, S. Shakerin, A. Hadadzadeh, and B. Shalchi Amirkhiz
Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg cast alloy substrate, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Sajad Shakerin, Josh Kelly, Jian Li, and Mohsen Mohammadi
Additive manufacturing of an Fe–Cr–Ni–Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms, Amir Hadadzadeh, Ayda Shahriari, Babak Shalchi Amirkhiz, Jian Li, and Mohsen Mohammadi
Considerations for leveraging flexible loads to decarbonize electricity and transportation, Alexander Headley and Mitch Ewan
Energy storage sizing for grid compatibility of intermittent renewable resources: A California case study, Alexander J. Headley and David A. Copp
Discrete logic vs optimized dispatch for energy storage in a microgrid, Alexander J. Headley, Benjamin L. Schenkman, and David M. Rosewater
Laser-based powder-bed fusion strategies for the fabrication of cellular structures with a fine resolution, Fatemeh Hejripour, Muhammad Abdus Salam, Gary L. Bowlin, and Ebrahim Asadi
Thermomechanical processing of an ultralight Mg-14Li-1Al alloy, Rezawana Islam, Amir Hadadzadeh, Mary Wells, and Meysam Haghshenas
A note on computing the growth of small cracks in AM Ti-6Al-4V, Rhys Jones, Reza Molaei, Ali Fatemi, Daren Peng, and Nam Phan
Comparison of the predictions of Langevin Dynamics-based diffusion charging collision kernel models with canonical experiments, Li Li, Harjindar Singh Chahl, and Ranganathan Gopalakrishnan
Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy, Reza Molaei, Ali Fatemi, and Nam Phan
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance, R. Molaei, A. Fatemi, N. Sanaei, J. Pegues, N. Shamsaei, S. Shao, P. Li, and D. H. Warner
Characterization and analysis of porosities in high pressure die cast aluminum by using metallography, x-ray radiography, and micro-computed tomography, Ahmad Nourian-Avval and Ali Fatemi
Fatigue Design with High Pressure Die Cast Aluminum Including the Effects of Defects, Section Size, Stress Gradient, and Mean Stress, Ahmad Nourian-Avval and Ali Fatemi
Fatigue life prediction of cast aluminum alloy based on porosity characteristics, Ahmad Nourian-Avval and Ali Fatemi
Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects, J. W. Pegues, S. Shao, N. Shamsaei, N. Sanaei, A. Fatemi, D. H. Warner, P. Li, and N. Phan
Analysis of the effect of internal defects on fatigue performance of additive manufactured metals, Niloofar Sanaei and Ali Fatemi
Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals, Niloofar Sanaei and Ali Fatemi
Selective laser melted stainless steel CX: Role of built orientation on microstructure and micro-mechanical properties, Mehdi Sanjari, Amir Hadadzadeh, Hadi Pirgazi, Ayda Shahriari, Babak Shalchi Amirkhiz, Leo A.I. Kestens, and Mohsen Mohammadi
On the Effect of Building Direction on the Microstructure and Grain Morphology of a Selective Laser Melted Maraging Stainless Steel, Mehdi Sanjari, Amir Hadadzadeh, Ayda Shahriairi, Saeed Tamimi, Hadi Pirgazi, Babak Shalchi Amirkhiz, Leo Kestens, and Mohsen Mohammadi
Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel, Ayda Shahriari, Ladan Khaksar, Ali Nasiri, Amir Hadadzadeh, Babak Shalchi Amirkhiz, and Mohsen Mohammadi
A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels, Seyed Amir Reza Shamsdini, Sajad Shakerin, Amir Hadadzadeh, Babak Shalchi Amirkhiz, and Mohsen Mohammadi
Wake statistics of different-scalewind turbines under turbulent boundary layer inflow, Xiaolei Yang, Daniel Foti, Christopher Kelley, David Maniaci, and Fotis Sotiropoulos
Submissions from 2019
Computational study of electrostatic focusing of aerosol nanoparticles using an einzel lens, Rayhan Ahmed and Ranganathan Gopalakrishnan
High potential, near free molecular regime Coulombic collisions in aerosols and dusty plasmas, Harjindar Singh Chahl and Ranganathan Gopalakrishnan
Adhesion of electrosprayed chitosan coatings using silane surface chemistry, Ewe Jiun Chng, Andrew Blass Watson, Vikram Suresh, Tomoko Fujiwara, Joel D. Bumgardner, and Ranganathan Gopalakrishnan
Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing, C. Dharmendra, A. Hadadzadeh, B. S. Amirkhiz, G. D. Janaki Ram, and M. Mohammadi
The Morphology, Crystallography, and Chemistry of Phases in Wire-Arc Additively Manufactured Nickel Aluminum Bronze, Chalasani Dharmendra, Amir Hadadzadeh, Babak Shalchi Amirkhiz, and Mohsen Mohammadi
Transferability of interatomic potentials in predicting the temperature dependency of elastic constants for titanium, zirconium and magnesium, S. Alireza Etesami, Mohamed Laradji, and Ebrahim Asadi
Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects, Ali Fatemi, Reza Molaei, Jutima Simsiriwong, Niloofar Sanaei, Jonathan Pegues, Brian Torries, Nam Phan, and Nima Shamsaei
Implicit large-eddy simulation of wind turbine wakes and turbine-wake interactions using the vorticity transport equations, Daniel Foti and Karthik Duraisamy
Effect of wind turbine nacelle on turbine wake dynamics in large wind farms, Daniel Foti, Xiaolei Yang, Lian Shen, and Fotis Sotiropoulos
Size effects on geometrical accuracy for additive manufacturing of Ti-6Al-4V ELI parts, Behzad Fotovvati and Ebrahim Asadi
Process-property-geometry correlations for additively-manufactured Ti–6Al–4V sheets, Behzad Fotovvati, S. Alireza Etesami, and Ebrahim Asadi
Evolution of a Gradient Microstructure in Direct Metal Laser Sintered AlSi10Mg, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Brian Langelier, Jian Li, and Mohsen Mohammadi
Microstructure Evolution in Direct Metal Laser Sintered Corrax Maraging Stainless Steel, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Jian Li, and Mohsen Mohammadi
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg, Amir Hadadzadeh, Babak Shalchi Amirkhiz, and Mohsen Mohammadi
Role of hierarchical microstructure of additively manufactured AlSi10Mg on dynamic loading behavior, Amir Hadadzadeh, Babak Shalchi Amirkhiz, Akindele Odeshi, Jian Li, and Mohsen Mohammadi
Maximizing Revenue from Electrical Energy Storage Paired with Community Solar Projects in NYISO Markets, Alexander Headley, Clifford Hansen, and Tu Nguyen
A thermal conductivity model for microporous insulations in gaseous environments, Alexander Headley, Michael Hileman, Aron Robbins, Edward Piekos, Patrick Fleig, Adam Martinez, and Christine Roberts
Thermal conductivity measurements and modeling of ceramic fiber insulation materials, Alexander J. Headley, Michael B. Hileman, Aron S. Robbins, Edward S. Piekos, Emily K. Stirrup, and Christine C. Roberts
Characterization and analysis of hot compression behaviors of an ultralight Mg-Li-Al alloy, Rezawana Islam, Amir Hadadzadeh, Marry Wells, and Meysam Haghshenas
Solidification behavior of dilute Mg-Zn-Nd alloys, A. Javaid, A. Hadadzadeh, and F. Czerwinski
Phase field crystal simulations of the kinetics of Ostwald ripening in two dimensions, Kyle A. Moats, Ebrahim Asadi, and Mohamed Laradji
Crack paths in additive manufactured metallic materials subjected to multiaxial cyclic loads including surface roughness, HIP, and notch effects, Reza Molaei and Ali Fatemi